The 07S was designed with a completely new, twin roll hoop chassis but using the proven 06S aero package. Some aerodynamic updates were made. The twin roll hoops meant that a new engine cover had to be designed and the opportunity was taken to change the shape and reduce the drag. The new chassis was designed and built to LMP1 crash regulations. This means that it is particularly strong in LMP2 guise. All the FIA crash tests had to be carried out anew, the first time that Zytek as a group had done this for a chassis.
Mechanically the rear end is the same as the 06S, although the front suspension had to be modified because of the new chassis. The fuel system was completely revised. Effectively, over a two-year period, Zytek had built a car completely different from the 04S.
The GZ09S aero package includes a rear wing to meet with the latest regulations. The width is less, as is the box size. The end plate fitting has also changed. The plate is flat as before but is now simply fitted to the tail section with an angle bracket, as mandated by the new regulations. The tail section has been changed to generate more down force. It now features inner dive planes, which it did not have in 2008. The side bleed in front of the radiator behind the front wheel has been changed with a larger bleed area. There is a panel that closes off the hole, which is also there to legalise the side opening.
The front suspension geometry has been changed for the GZ09S. This has been done to help reduce understeer in the car and also to protect tyre life, a factor that is has becoming increasingly important with the new pit stop regulations.
In addition to the front suspension geometry, the GZ09S has a new AP Racing brake caliper package, a step forward for stiffness and cooling. The brake duct system has also been changed to take full advantage of this.
Status : RELEASED
P2 – ZYTEK 07S / GINETTA ZYTEK 09S
STATUS
GENSTRINGS (Low Quality Screens)
CARLIST
TYRES MICHELIN : GenString=11xxxxxxx
TYRES DUNLOP : GenString=12xxxxxxx
BODY 2007-2009 : GenString=1x1xxxxxx
BODY 2010-2011 : GenString=1x2xxxxxx
KIT LMS : GenString=1xx1xxxxx
KIT LM : GenString=1xx2xxxxx
RWING BIG : GenString=1xxx1xxxx
RWING SMALL : GenString=1xxx2xxxx
RWING SUPPORT 1 : GenString=1xxxx1xxx
RWING SUPPORT 2 : GenString=1xxxx2xxx
WINGLET DOUBLE : GenString=1xxxxx1xx
WINGLET SIDES : GenString=1xxxxx2xx
WINGLET SIMPLE : GenString=1xxxxx3xx
WINGLET LM : GenString=1xxxxx4xx
NO WINGLET : GenString=1xxxxx5xx
DEFLECTOR : GenString=1xxxxxx1x
NO DEFLECTOR : GenString=1xxxxxx2x
SWHEEL 1 : GenString=1xxxxxxx1
SWHEEL 2 : GenString=1xxxxxxx2
Release package :