EnduRacers | Flat6Series Readme (GB)
ABOUT THE MOD
EnduRacers releases the Flat6 Series mod ! This mod features a fictional racecar designed for close monotype racing series and races. The car is powered by a 3800cc engine, delivering 450bhp at 8500rpm. Power is delivered through a sequential six-speed manual gearbox and the complete package weighs in at 1200kg.
Originally based for a new platform, but anticipated on the rFactor platform, the mod uses a high definition model, with lot of 3D details, and a very immersive cockpit. All rFactor advanced features are included in the package : fresnel shaders bodywork reflects, advanced headlights and brakelights technology,…The package comes with more then 200 paint shemes, and the team is already working on some new ones to be added later.
FEATURES INFORMATION
FEATURES – v1.0
Graphics : High quality 3D Model and cockpit.
Graphics : Advanced rFactor1 materials with fresnel shaders and lightflares.
Graphics : More then 250 paint shemes.
Graphics : Full graphic specifications with options included.
Graphics : Specific UI Data menu textures.
Physics : Very accurate physics handling, created by Gentlemen Racers physics team.
Physics : Validated with telemetry and real drivers.
Physics : rFactor v1.250 optimisations (tyres wear curves, pit menu,…).
Physics : FFB upgrades to choose your preferred steering force.
Physics : Real Feel FFB and Leo FFB support.
Physics : Advanced damages quality.
Sounds : High fidelity sounds, in Cup and World Cup versions.
INFORMATIONS
Graphic bug making the cars look dark when moving from Flat6Series mod to another mod (caused by new fresnel shaders). When you go from 1 mod to Flat6 Series mod, or contrary, it’s better to leave and start again the game.
The Team has decided to develop only one type of physics.
The Team has developed 2 type of car sounds, for Cup and World Cup cars (different exhaust on the World Cup cars). In addition, for each car you can choose as upgrade an update of the car sounds mainly for limiters, to correct some bugs caused by the rFactor sound engine.
HARDWARE / SOFTWARE CONFIGURATION
STEERING WHEEL UPGRADES
You can adjust the level of the power steering by using these upgrade levels:
rFACTOR LIGHTNING PARAMETERS FOR NIGHT RACES OPTIMAL PERFORMANCES
In your PLR (find it in UserData\MyProfile\MyProfile.plr) change the following lines to get the best, render on/in car with a maximum of FPS and realism.
Max Headlights=”3″ // Max headlights visible relative to your car.
Headlights On Cars=”1″ // Headlights illuminate other cars.
rFACTOR SOUNDS PARAMETERS
rFACTOR FFB OPTIONS FOR LOGITECH WHEELS
Inverse efforts for other manufacturers.
You can adjust between -72% and -100% for more force or use upgrade in the mod, depends on pilots and wheels.
rFACTOR RATES
FFB PARAMETERS
Controler.ini ForceFeedback section values recomended for Logitech G25 Wheels :
ForceFeedback section for G25
Logitech panel configuration for G25 :
REAL FFB SETUP
In the upgrades of the selected car, choose RealFeel (FFB level 0).
Logitech panel :
If you have low forces in the centre of your wheel, you can increase the red circled parameter in your driver CP.
After this, put this information in your RealFeelPlugin.ini :
[General]
RealFeelIsOn=True
ConsoleEnabled=False
SpeechEnabled=True
LogEnabled=False
KeyRepeatDelay=0.100000
SteerForceInputMax=11500.000000
ConsoleRepeatDelay=0.100000
MinSpeed=20.000000
DefaultMaxForceAtSteeringRack=-1500.000000
DefaultSteeringDamper=11500.000000
DefaultSmoothingLevel=0
[Cup]
MaxForceAtSteeringRack=-2400.000000
SteeringDamper=11500.000000
FFBMixerRealFeelPercent=100.000000
SmoothingLevel=0
[SuperCup]
MaxForceAtSteeringRack=-2400.000000
SteeringDamper=11500.000000
FFBMixerRealFeelPercent=100.000000
SmoothingLevel=0
[World Cup]
MaxForceAtSteeringRack=-2400.000000
SteeringDamper=11500.000000
FFBMixerRealFeelPercent=100.000000
SmoothingLevel=0
[SuperCup]
MaxForceAtSteeringRack=-2400.000000
SteeringDamper=11500.000000
FFBMixerRealFeelPercent=100.000000
SmoothingLevel=0
LEOFFB AND REAL FEEL FFB MIXED SETUP
Information to put in your LeoFFB plugin :
17.5 Front Wheel lock angle, degrees (max deflection to one side from straight on).
0.67 Front wheel distance to centerline (half the front wheel track) in metres, from .pm file.
1.65 Front axle distance to body reference point (about half the wheel base) in metres, from .pm file.
1.2 Relative strength of FFB effects.
10.0 Aligning moment curve shape / feeling of tyre losing grip. Lower numbers are duller, range 1.0 .. 10.
0.99 Negative aligning moment parameter for high slip angles, range 0.0 … 1.0.
10.19 Slip angle where aligning moment reverses direction – typically between 8 and 15 degrees.
3.8 Caster (dimetionless).
0.0 Camber ratio (not degrees!).
1.0 Road bumps feeling on the wheel.
11500.0 maximum FFB force for stationary and low speed effects.
12.0 stiffness of stationary wheels.
1.5 wheel rubber hardness (1..5).
7.0 how quickly static forces drop off when rolling.
Specific parameter by car to replace in the leoFFB plugin.ini (only lines 2 and 3) :
GT3 – Flat Six CUP :
0.785 Front wheel distance to centerline (half the front wheel track) in metres, from .pm file.
1.177 Front axle distance to body reference point (about half the wheel base) in metres, from .pm file.
Informations for your RealFeel plugin :
[General]
RealFeelIsOn=True
ConsoleEnabled=False
SpeechEnabled=True
LogEnabled=False
KeyRepeatDelay=0.100000
SteerForceInputMax=11500.000000
ConsoleRepeatDelay=0.100000
MinSpeed=20.000000
DefaultMaxForceAtSteeringRack=-1500.000000
DefaultSteeringDamper=11500.000000
DefaultSmoothingLevel=0
[Cup]
MaxForceAtSteeringRack=-2400.000000
SteeringDamper=11500.000000
FFBMixerRealFeelPercent=80.000000
SmoothingLevel=0
[SuperCup]
MaxForceAtSteeringRack=-2400.000000
SteeringDamper=11500.000000
FFBMixerRealFeelPercent=80.000000
SmoothingLevel=0
[World Cup]
MaxForceAtSteeringRack=-2400.000000
SteeringDamper=11500.000000
FFBMixerRealFeelPercent=80.000000
SmoothingLevel=0
[SuperCup]
MaxForceAtSteeringRack=-2400.000000
SteeringDamper=11500.000000
FFBMixerRealFeelPercent=80.000000
SmoothingLevel=0
INSTALL THE MOD
After download, launch the Flat6 Series mod installer .exe file.
Install the Flat6 Series mod in your main rFactor folder.
ACKNOWLEDGEMENTS
Special thanks for their help in the mod’s developement and their collaboration to all drivers, engineers, team members, and of course a big thank to the community.
PROTECTION – LICENCES – DISCLAIMER
This creation is protected by Creative Commons contract.
All EnduRacers stuff included in this pack is under protection of Creative Commons intellectual work protection licences.
All files included in this mod (including 3d files, sounds, physics, skins and all other files) are property of EnduRacers.
It’s not allowed to modify the 3d model, or other 3d parts of the mod. Physics or sounds files are not allowed to be modified.
Use of content of the mod to another mod is forbidden, unless you get an authorisation from EnduRacers.
Conversion on other platforms are forbidden, unless you get an authorisation from EnduRacers.
This mod may not be profited from commercially by a third party.
The material provided in our mod is not connected to ISI (Image Space Incorporated).
Use the mod at your own risk. EnduRacers awill not be taken responsible for losses or damages resulting from the use of this mod.
EnduRacers © 2013
© Copyright 2013 EnduRacers Modding Team. All Rights Reserved — Website optimized for Mozilla Firefox | WEBSITE | LANGUAGE